Böcker i Workshop Practice-serien

A fully comprehensive survey of the use of a lathe for all forms of screwcutting in all thread forms, imperial and metric. Calculations, gear trains, conversions, etc are all explained and also set out in tabular form.

A Unimat mini-lathe authority has developed numerous accessories and techniques to assist the model engineer in getting the best from the machine. These projects increase the scope of the machine and advise on the performance of a number of tricky operations.

This book is a thorough and practical discourse on how to use the lathe for all types of milling work. Next to turning, the most valuable use of the lathe is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by adding a separate milling attachment.

This book is a complete course on using and improving the new generation of budget lathes. It explains everything from setting up and 'tuning' the machine for best performance to using accessories and carrying out tasks.

A workshop information anthology combining useful advice and instruction for beginners, with explanations of tools and techniques often familiar in name but not always found described in detail.

The long-awaited new edition of Tubal Cain's comprehensive, classic guide to making the reading technical workshop drawings, featuring the author's classic text with completely new illustrations and technical drawings, specially created for this purpose.

The book deals with electricity in the garage or home workshop and includes everything from fitting a 13 amp plug, fusing, equipment, lighting, fixtures, fittings and wiring for 240 volts mains electricity to wiring up a new workshop building.

A practical guide to running three-phase equipment on single-phase electricity supplies. Often, model engineers buy industrial workshop equipment which usually require a three-phase electricity supply. Although ready-built phase converters are available, they can often cost as much or even more than the equipment purchased.

This book deals with all aspects of the lathe covering the selection of a machine and its construction, including modern types of machine as well the more traditional models. All aspects of tooling, both traditional and modern are covered in depth, as are all machining operations.

Making a major purchase of a lathe, a milling machine or combination lathe/mill is a daunting prospect for any model engineer. This book provides practical advice on how to make the selection and provides descriptions and technical data about the wide range of machines and accessories available.

This book deals with choosing and using a milling machine and its accessories - the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items. The usage of each machine and accessory is described in sufficient detail for the vast majority of uses in the home workshop.

When Harold Hall was Editor of Model Engineer's Workshop magazine, he was surprised by how just so many of his readers had no access to a workshop at home, or even at college. His new book is a complete guide to building or converting and equipping a workshop space.

A complete introduction to the process of the grinding and polishing of metals that gives specific details of the equipment and devices needed and the materials used to make grinding wheels, belts and papers.

Contains a comprehensive range of mathematical data which is required in the metalworking workshop and by those designing a wide range of engineered items, tools and machines. This book provides in a single concise volume that is otherwise only available by reference to many different sources.

This practical book describes the wide range of bearings found in different types of models built in home workshops. It reviews the choice of bearings, materials, the type of bearing to use for each particular application and highlights the differences between home made and off-the-shelf bearings.

A project book including 18 designs for workshop equipment based on the author's popular articles published in Model Engineer's Workshop magazine. The projects are in themselves satisfying exercises in metalworking that once completed will make valuable additions to the model engineer's range of equipment.

All types of electric motors for workshop use are described here. Principles, characteristics, operation, installation, speed control, braking etc. plus generators, safety, testing and a useful section on identifying and applying scrap motors.

Sharpening workshop tools is one task that is least understood by the majority of workshop owners. This book illustrates how most sharpening tasks can be carried out using an off hand grinder and a few simply made accessories to a standard comparable to that achieved using much more sophisticated equipment.

This book describes the many and varied materials used by model engineers in their workshops such as ferrous and non-ferrous metals, hard and soft woods, plastics, abrasives, adhesives, bearing materials, ceramic and refractory materials, castings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants and solder

The principles underlying radial work on a metalworking lathe are explained in depth in this book. It covers the methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table.

Photo etching in the form of electronic equipment printed circuit boards will be familiar to all modellers. This book covers the less familiar application by model engineers of those same techniques to the design of high-quality graphics and precision production of metal parts for all aspects of model making.

A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers' Workshop magazine's leading authorities. Eight projects lead prospective model engineers through all of the techniques involved; each project is extensively illustrated with step-by-step photographs and workshop drawings.

Making twenty-two simple but useful adjuncts to the tool kit for bench and lathe use, none taking any more than 3 to 4 hours or involving special materials, yet each able to save considerable time in use as well as aiding accuracy. With working drawings, photographs and sketches etc.

This book assumes no previous experience and using the medium of twelve lathe turning projects will lead prospective model engineers through all of the basic techniques needed to tackle ambitious projects. All of the projects are extensively illustrated and full working drawings accompany the text.

A selection of useful hints and tips for metalworkers culled from a seventy years of Model Engineer magazine - as relevant today as when they were first printed. Includes many helpful nuggets of knowledge which have never been republished until now.

A collection of fifteen invaluable additions to model engineer's armoury of tools and equipment from the former editor of Model Engineer's Workshop magazine. This practical collection covers benchwork, the lathe and milling operations.

Explanations and reasons for all conventional types of gears are clearly set out in this book together with useful tables and machinery techniques to form an invaluable reference work for anyone dealing with machinery.

Model engineers and many small workshops do not need, or have access to, much of the sophisticated measuring equipment used in industry. Accurate marking out and measurement by more basic means at all stages of work are comprehensively described by an expert engineer.

An introduction to the fascinating world of horology for the complete beginner. This book explains the terminology of the clockmaker and provides general details of clock construction including layout of wheels and escarpments, all of which are fully described and illustrated.

This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.